cocpops 19 Posted October 16, 2015 Report Share Posted October 16, 2015 I dropped my gun Doh ! And it broke at the neck. It's beyond fixing. It's an FX Cyclone I've been told that there's a few models use the same stock ? Can anyone confirm this it might help me find one. It's a Right handed stock I'm after wood or synthetic. I did price a new one but I could buy a good second hand rifle for the same price. Quote Link to post
j j m 6,481 Posted October 17, 2015 Report Share Posted October 17, 2015 hope you find a good second hand one mate,expensive to buy new Quote Link to post
Cliff Ray 185 Posted October 17, 2015 Report Share Posted October 17, 2015 Are you sure it is beyonf fixing? Normally drilling and fitting a pin or two between the parts will make a string enough joint. Quote Link to post
VWman 232 Posted October 17, 2015 Report Share Posted October 17, 2015 I dropped my gun Doh ! And it broke at the neck. It's beyond fixing. It's an FX Cyclone I've been told that there's a few models use the same stock ? Can anyone confirm this it might help me find one. It's a Right handed stock I'm after wood or synthetic. I did price a new one but I could buy a good second hand rifle for the same price. If a replacement is hard to find second hand it just may be possible to bond it all back together so keep all the bits. Not saying you would not see the glue line but it could be put in colour or dark stain. Post a photo. If it's do able and there is no one closer I will have a go foc. Quote Link to post
The one 8,398 Posted October 17, 2015 Report Share Posted October 17, 2015 Think I would be pinning and glueing it till you work out your options and get a price , let's be honest you can't do any more damage 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.