johnrthrfrd 223 Posted September 6, 2014 Report Share Posted September 6, 2014 Trying to zero scope need to get pellet about another 2" to right but run out of clicks on scope what's the answer please. Quote Link to post
Cedric 132 Posted September 6, 2014 Report Share Posted September 6, 2014 Providing the scope is in good order, it's not mounted correctly. You could try swapping the mounts round, front to back, change sides that you tighten the mounts on. Wind the turrets to a central position and try again. If that doesn't work check your moderator - in fact check it first. See if the pellets are clipping it. Quote Link to post
Bigad 136 Posted September 7, 2014 Report Share Posted September 7, 2014 My mate had same problem with his air arms TDR I went over once he told me about the problem it was the barrel of the gun that was bent simple fix loosen the grub screw on the bit that held barrel to air cylinder and tap it back straight Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.