PUG 3 Posted January 7, 2014 Report Share Posted January 7, 2014 I've bought some PTFE sheet in 0.25mm and 0.50mm with the aim of making a piston liner sleeve for my HW97K, seeing what Marksman and Skot have achieved, has inspired me to give it a go and strip my rifle down and give it a polish up etc. I'm very green to this and was wondering how best to make and fit the liner. Has anyone got any photos of doing this? Quote Link to post
Skot Ruthless Teale 1,701 Posted January 8, 2014 Report Share Posted January 8, 2014 I didnt use one in mine mate. Theres is very little room between the spring and inside the piston in my rifle. The bit of ptfe i have is way too thick to get in there. So just left it out It still gives a slight twang tho but its very dull and quiet Quote Link to post
villaman 9,980 Posted January 8, 2014 Report Share Posted January 8, 2014 You can use a old plastic bottle cut to size Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.