mexlad 189 Posted September 19, 2013 Report Share Posted September 19, 2013 Hi, just bought a divers bottle to charge my BSA scorpion se, I've tried to fit the quick fill adapter to the whip and it was tight I could only hand screw it about a turn and had to tighten the rest with spanners, and it stopped half way down, is this on enough or should it go all the way down to the bottom ? Quote Link to post
mexlad 189 Posted September 19, 2013 Author Report Share Posted September 19, 2013 Pic Quote Link to post
moxy 617 Posted September 19, 2013 Report Share Posted September 19, 2013 Is the screw adapter loose? If not. It's home and ok. Quote Link to post
mexlad 189 Posted September 19, 2013 Author Report Share Posted September 19, 2013 Is the screw adapter loose? If not. It's home and ok. No mate its tight iv nipped it with the scanners, I tried it without the gun attached and the air came out the valve, I just wasn't sure if it was right, thanks for the reply mate Quote Link to post
moxy 617 Posted September 19, 2013 Report Share Posted September 19, 2013 Sounds like its ok. You will find out when you charge your gun. If there is a slight leak. Wind it out and put some PTFE around the threads. Quote Link to post
mexlad 189 Posted September 19, 2013 Author Report Share Posted September 19, 2013 Sounds like its ok. You will find out when you charge your gun. If there is a slight leak. Wind it out and out some PTFE around the threads. Will do mate , thanks again Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.