Question

[Mick C. 229]

How do you load the magazine on a theoben rapid 7 mk1 ?

 

Cant seem to get the seventh pellet into the magazine so I put the magazine in the breech with six pellets in situ.

 

Problem is once you take the first shot the magazine doesn't seem to rotate to house the next pellet.

 

Its as though there is no tension in the magazine .

 

I know im doing something wrong but cant seem to sus it out

 

Cheers

 

 

[the big chief 3,099]

Sounds like you have wound it the wrong way and bust the spring mate I did the same when I had my rapid years ago have a look on YouTube there will be a vid on how to fix it

[paulus 26]

empty all the pellets out, then rotate the clear plastic top bit whilst holding the black bottom bit, when it reaches the last hole, put your first pellet in, it should then be ok under its own pressure, move the clear plastic top back one hole at a time and fill each hole with a pellet in turn, if that makes sense.

[Mick C. 229]

Yes it does make sense

 

Thanks for the input lads

[Mick C. 229]

Nice one

 

Jobs a good un