Webley Raider

[J.D. 40]

hi lads, ive just bought a webley raider.22 , 2 shot , when i bought it the lad said he couldnt zero it in, so i tried but was getting no were , the pellets were all over the place, ive bought some new scopes and the grouping is still all over the place, theres no way within 20 shots at the target im that far away, 2 in 1 place, right next to each other, and the other 2 about 7 inches off , any ideas lads, ? also, is there a 10 shot mag i can also put on this and if so is it much of a job to do ?? cheers lads,

[Skot Ruthless Teale 1,701]

what range are you shooting mate? try cleaning the barrel and maybe try some different pellets.?

also if the gun has a silencer the pellets might be clipping that.?

Edited June 10, 2013 by Skot Ruthless Teale

[J.D. 40]

im zeroing at 20 yards mate, tried diffrent pellets, still all away the place,

[Skot Ruthless Teale 1,701]

don't know then at 20 yards it should be pellet on pellet!

[J.D. 40]

thats what im saying mate, the pellets are all awa, so recon the rifle could need a service ?? but what needs done, anyone no ??

[AR177 588]

Had the same issue on my dads 10xs raider, the barrel ports had become miss aligned after the barrel became loose, this meant that not only did the barrel wobble and throw the zero off the power levels were all over the place

 

After a service at A&M Custom Gunsmiths it is now shooting pellet on pellet.

 

Make sure everything is tight including any barrel bands etc cos if its loose the barrel will wobble all over the place

 

You will be able to tell if the barrel is loose you can rotate it by hand

 

ATB

 

Adam

Edited June 10, 2013 by AR177

[bullit666 5]

Have you run it through a chronograph. If its shooting inconsistant then that won't help.

I would give it a damn good clean and get a pellet sampler pack off eBay. What pellets did the previous owner use?