Jamie93 57 Posted September 17, 2012 Report Share Posted September 17, 2012 Hi All, I have just bought a HW100S and am having difficulties filling it up. It has a Brass DIN adaptor with it but no quick fill. Is it worth while buying a quick fill if filling from a divers bottle? Do I need a 'DIN thread To 1/8" Charging Adaptor'? How much shall I fill it up as I understand you lose some air when unscrewing botle? At what level should I stop shooting and refil? Thanks Jamie93 Quote Link to post
secretagentmole 1,701 Posted September 17, 2012 Report Share Posted September 17, 2012 (edited) OK, have you got a quickfil cylinder on it? ie is there a dirty great hole in the cylinder behind the guage? If there is not, you will need a quickfill cylinder, you can buy this from A&M Custom Gunsmiths... If you unscrew it to fill the cylinder does it matter how much air you lose? You are filling it after all! You fill these to a maximum of 200 bar! Edited September 17, 2012 by secretagentmole Quote Link to post
Jamie93 57 Posted September 17, 2012 Author Report Share Posted September 17, 2012 I do have a quick fill cylinder but not a quick fill probe. I read somewhere that the quick fill probes can cause build up of dirt so was just going to unscrew it to fill? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.