The Seeker 3,048 Posted June 30, 2012 Report Share Posted June 30, 2012 OK Im after some advice chaps I have just purchased an ATN 410 NV scope, now i intend to use this for bunnies on my Ruger 10/22. I currently have a scope mounted on the rifle so i would like to be able to interchange between the normal scope for day use and NV scope for night. Heard of quick release mounts but i have no knowledge of them, would these do the job and has anyone got and recommendations of make etc? Also do they hold zero or would i have to re zero each time I change scope (this would be a real ball ache). Cheers Quote Link to post
wabbit slayer 16 Posted June 30, 2012 Report Share Posted June 30, 2012 If they are like mine rather than an alen key to lock them up you can use a coin. then what i do is put a small mark on the gun where the mount goes. This then should hold zero when you swap them about. fingers crossed. Quote Link to post
mattydski 560 Posted June 30, 2012 Report Share Posted June 30, 2012 I had them on a previous .243, Leupold mounts... were 'ok' not 100%. usually a coulpe of clicks off, so you still had to rezero, especially on the centerfire, with the accuracy required, and the ethics of shooting fox and deer... Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.