air arms s200 (pls help..........)

[Qbgrey 4,409]

right fellas i have a mk1 s2oo and after replacing a few parts i have one problem to overcome then its ready to use (just got it).

i have removed the plastic bolt handle ,and need info on how to fix it.1.is thier a small spring that goes behind handle,then handle on ,next washer,then locking nut.ive tried this and the bolt wont tighten,not enough thread protruding. a guy on here has helped me so much already and dont wont to bother the chap again hence the reason i put this up.thanks fellas.

[Phantom 631]

Hi buddy,

 

I've already told you its no bother! It's why I joined this forum to help others and learn from those more knowlageable than myself

 

Okay; the sequence is Bolt, then the Handle, then the Washer then finally the Nut.

There should be no spring on the bolt assembly other than the one that holds the BB in place and you should not be able to access that without taking the scope off and going in through the top of the block (if I remember correctly).

PM me your address I'll send you some information that you will find useful

 

Tony

[Qbgrey 4,409]

Hi buddy,

 

I've already told you its no bother! It's why I joined this forum to help others and learn from those more knowlageable than myself

 

Okay; the sequence is Bolt, then the Handle, then the Washer then finally the Nut.

There should be no spring on the bolt assembly other than the one that holds the BB in place and you should not be able to access that without taking the scope off and going in through the top of the block (if I remember correctly).

PM me your address I'll send you some information that you will find useful

 

Tony

lol thanks tony,im nearly there,cant bloody wait.