s410 bolt?

[willy17 1]

i have just bought a s410 can anyone tell me do they do left and right handed bolts as mine is pointing upwards and looks a bit odd?

[dave goodall 10]

try chambers gun spares mate http://www.gunspares.co.uk/

Edited August 3, 2011 by dave goodall

[Buster321c 1,010]

They do a left handed bolt , but they can be used both ways , makes no difference really .

 

Post a picture and we can see what you mean .

Edited August 3, 2011 by Buster321c

[willy17 1]

the bolt bends upwards rather than downwards it works fine but looks a bit strange

[RiffRaff 5]

why not just take the bolt handle off the back of the action an warm the handle up with a hot air gun to melt the loc-tight then turn it through 180 degrees job done

 

Niel

[Alex Arrigone 24]

The bolts loose mate. Happened to me a few months ago. Just need tightening up with an Allen key

 

Atb

 

Alex

[willy17 1]

the bolt is not loose it is bent the wrong way

[Alex Arrigone 24]

can you put a pic up mate?

[RiffRaff 5]

does your bolt look like one of these

 

 

 

all you have to do is remove it from the action using a 3mm allen key. then warm it up an then turn to the way that you want it. you may have to get it pretty warm to loosen the loc-tite if you pull it apart you will have 2 bits like below

 

 

only other thing is that you might have to strip the action to change a pin round but you might not

 

hope this helps