Beano1456 14 Posted May 26, 2011 Report Share Posted May 26, 2011 so i decided to take the stock of my bsa to give it a proper clean since i bought it and check for any unseen rust. so i took it off all fine there was a few sneaky screws hiding but i got them out pulled the gun away from the stock and plced the gun gently down nd moved the stock so i went back to where i had unscrewed everything to put all the screws in a safe place and i noticed a small peice of metal about an inch long and a 10mm wide with a small angle at one end with a hole in the other and i have no idea where it has come from i will try upload some photo's Quote Link to post
andyfr1968 772 Posted May 26, 2011 Report Share Posted May 26, 2011 Hi, mate. I don't know what BSA you've got but if you have a look on the Chamber's Gun Spares web site you should be able to find an exploded diagram of your gun and be able to see where it's come from. Good luck!! Cheers. Quote Link to post
Beano1456 14 Posted May 26, 2011 Author Report Share Posted May 26, 2011 well i put were it seemed to fit and it is working okay now so fingers crossed it wont go out with bang Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.