Rmfire magic trigger CZ452

[Rake aboot 4,936]

Bought the trigger kit for me 22 from rimfire magic and fitted it today.

OMG what a difference!!, used the small (blue) tube on the sear and fitted the 2lb spring, prefect

Nice crisp break and a clean pull, has completely done away with creep. Tried the 1.75lb spring but felt a wee bit wary as the gun gets a hard time.(paranoia as the sear was fine!)

 

I cannot recommend this mod highly enough, The standard trigger has done me for years and only now I realise how shit it really is !

 

Best tenner spent on any gun.

For anyone interested I now have the Red tube and the 1.75lb and 1lb springs left. Will sell if anyone is interested.

 

ATB

[masmiffy 82]

Bought the trigger kit for me 22 from rimfire magic and fitted it today.

OMG what a difference!!, used the small (blue) tube on the sear and fitted the 2lb spring, prefect

Nice crisp break and a clean pull, has completely done away with creep. Tried the 1.75lb spring but felt a wee bit wary as the gun gets a hard time.(paranoia as the sear was fine!)

 

I cannot recommend this mod highly enough, The standard trigger has done me for years and only now I realise how shit it really is !

 

Best tenner spent on any gun.

For anyone interested I now have the Red tube and the 1.75lb and 1lb springs left. Will sell if anyone is interested.

 

ATB

 

 

Have heard the same from others mate.

How difficult was it to do the job?

[Rake aboot 4,936]

Absolute dawdle bud, very easy.

Pin punch to remove the trigger. by the time I had messed about trying different tubes an springs it took an hour all in.

 

ATB

[hw100sniper 2]

It would take 20 mins max if you knew what springs you were going to use.I was the same as Rake tried the lighter ones but they were to sensitive i.e. when you knocked the gun but the gun went of so be careful .I done my 17hmr first then the 22lr so as to get my monies worth out the kit ,then my mate decided he needed the kit done as well so ended up doing his 2 rifles as well