HW100 Seal replacements

[RAMCAM 4]

Hi Lads

 

Does anyone know the BS measurements for the HW100 O-ring replacements or know a way of converting these measurements.

 

O-ring HW 100, 37.1 x 1.6 Cylinder clamp 2682C

O-ring HW 100, 15.6 x 2.5 Barrel clamp 2682B

O-ring HW 100, 32 x 2 Magazine 2603A*

O-ring HW 100, 13 x 2 Adaptor A 2704

O-ring HW 100, 2.57 x 1.78 Adaptor B 2703B

 

O-ring HW 100, 3 x 1.5 Valve stem 2655D

O-ring HW 100, 12 x 1.2 Breech block main (12 x 1) recommended 2658

O-ring HW 100, 5.5 x 1 Breech/probe seal .22 2659A*

O-ring HW 100, 4.5 x 1 Breech/probe seal .177 2659A*

O-ring HW 100, 4 x 1.5 Probe buffer 2618A*

O-ring HW 100, 2.57 x 1.78 Main valve inlet 2665D

O-ring HW 100, 7 x 1.5 Main valve outlet 2666

O-ring HW 100, 2 x 2 Main valve internal (2.57 x 1.78) recommended N/A

O-ring HW 100, 7 x 1.5 Regulator piston 2668

O-ring HW 100, 10 x 1.5 Tension adjuster (sometimes omitted) 2672

O-ring HW 100, 8 x 1.5 Barrel 2679

 

FX/V-Mach Probe, 5.28x1.78 PUR70

[RAMCAM 4]

Anyone

[rossi_j 99]

Sorry mate far to technical for me.

Hope someone helps you out

.atb. .ste.

[RaiderBoy 19]

http://www.par-group.co.uk/sealing-jointing/BS-O-Ring-Dimensions.aspx Any help?

 

Richard

[matt_hooks 188]

You'll need to dig through, but the info you need should be in here...

 

The Seal Mans O-ring handbook

[RAMCAM 4]

http://www.par-group.co.uk/sealing-jointing/BS-O-Ring-Dimensions.aspx Any help?

 

Richard

 

Hi Raiderboy

 

Perfect thanks a lot mate.

[RAMCAM 4]

You'll need to dig through, but the info you need should be in here...

 

The Seal Mans O-ring handbook

 

Hi Matt

 

That book should come in handy.

Thanks for the info