BREDA SEMI-AUTO

[Chid 6,783]

just wondering if any body can tell me how to strip one of these down for giving it a good clean. got the gun 2nd hand so it didnt have any instuctions with it lol and i aint got a baldies how a semi auto strips down

 

its a 12bore 3 shot semi auto with bredia brescia on one side and thats all i know about it

[dave1372 83]

just wondering if any body can tell me how to strip one of these down for giving it a good clean. got the gun 2nd hand so it didnt have any instuctions with it lol and i aint got a baldies how a semi auto strips down

 

its a 12bore 3 shot semi auto with bredia brescia on one side and thats all i know about it

 

 

~My missus has a 20 bore breda semi-auto, lovely gun to shoot and never jams. If you put up a picture I will tell you if it is similar. Then I can talk you through the process. Most semi autos are relatively easy to strip down anyway.

[Chid 6,783]

got no pics but this is the same gun in this link

 

http://picturearchive.auctionarms.com/9267170221/9348300/435fd4031e425c5d84eec1829f8a2b0c.jpg

 

the gun here seems to jam on the 3rd shot when firing no6 32g but dont for 7-1/2 28g so thats why im wanting to strip it

 

cheers chid

[perthshire keeper 1,239]

i have a breda semi outo too its a bit newer than the one on their. so i cant realy help. but it should be fairy easey the pin you hold to pull the slide back will pull out undo the knob at the end of the fore end and toake it off then the rest just pulls out.

[dave1372 83]

Try this :

 

click here

 

If these links aren't any help let me know.

[Chid 6,783]

cheers to both of you

[clint 45]

Is very easy to strip.

 

1- unscrew forend cap, take off.

2- take wood forend & barrel off, take spring & brass ring off. (remember wich way brass ring come off) clean tube were spring go ,must be smooth.

3- nok 2 pin out from trigger base( trigger complete unit)take out.

 

this is all you need to do.

 

clean all with oily rag, wipe down well , clean any rust with plastic scour pad. good spray every place with lub oil (not WD40)wipe surplus off with oily rag, & put back to gether, same way as take apart.use small piece of clean rag , with string attach to drop down barrel & pull thru. barrel shud look like mirror in side. simples