tealers

[danman 27]

does any body know were to get 2.5mm wire for tealers carnt seem to find it anywere and is 3mm to thick? thanks

[ellir0305 9]

does any body know were to get 2.5mm wire for tealers carnt seem to find it anywere and is 3mm to thick? thanks

 

the railways have just finished doing some fencing next to my house, so i have just made 50 new tealers, just keep your eyes open on sites

[Rhodey 96]

High Tenstile fence wire from any country store

[danman 27]

I can only find high tensile but its to hard to bend into the right place, so i need low tensile. But carnt find anywere that sells it. i can only find 3mm low tensile but dont know if that would be to thick.

[ellir0305 9]

High Tenstile fence wire from any country store

 

forgot to say, just make sure its the stuff you can bend easily,( i think its the non high tensile, which means it is more malleable but i'm not certain on that. )

 

make up a jig with nails in a peice of wood to bend the figure 4 and you can make them up pretty sharpish.

 

atb

[MR TEA POT 1,287]

High Tenstile fence wire from any country store

 

you do well with the fenns then ruining it by saying something stupid .High tensile are for hoop snares,it would take a fair while to make tealers out of it plus about 3 hernias. .

 

Go to any counrty store or farm shop they should have some,if its your first time just try the single tealers first as they are easier to make then go on to the fig.4 saves you wasting the wire.

[Rhodey 96]

High tenstile is for real men with muscles........and hair .

[MR TEA POT 1,287]

High tenstile is for real men with muscles........and hair .

 

wheres my aftersun :kiss: