maxtich

1.Tier-One Quick release mount for Pard NV008. 2 x Ampslus 18650 INR 3500 mAh Batteries + case + charging cable. 3.Liitokala Lii-S2 Battery charger. Also on sale elsewhere

Comes with all std equipment plus extra front sunshade..it’s around 18 months old and in not much used and excellent condition and works perfect. Selling as sticking with Thermal Also on sale elsewhere

This is the next generation of Theoben rifles that included Reg/Quick fill/Gauge/Fill nipple, R/h stock with additional adj cheek piece,Adj Butt plate,additional bipod rail underneath,Scalloped block,Angled bolt handle,400 cc buddy bottle,16 in screw-cut barrel fitted with silencer,Mk4 match grade fully adj trigger,dovetail rail,theoben 12 shot mag,most paperwork. It’s is in better than excellent condition,No cut out to stock,bipod stud has been removed and made good,odd minor light marks most to the woodwork,anti Temper still intact as far as i can see. I’ve NEVER used it,running around 11.5 ft with no issues. These are hard to find and not many about…also in my opinion are what Theobens should have evolved to as these now negate the need to take off bottle to fill or check the remaining air. Exclusively available on here.. I’m more than happy if it helps ..in handing over along the route from W/London to Warwickshire. All funds will be sent to my Charity Sane by me. Also available elsewhere

Original Infiray Laser Finder for Rico Thermal Rifle Scopes suitable especially for models RL42 and Rh 50 series with Quick release mount system. It’s in its original box,excellent condition have 2 Scopes hence for sale. These were an expensive add on and did cost around £475 Also advertised elsewhere. + Post of your choice

Powder & Primers Large federal gold or Cci large magnum primers (1000 packs) Vihtavouri N140 or N540 prefer 3.5 kg Tubs

MDT ORYX chassis for a T3/X About a month old comes Boxed with all the paperwork and have original receipt in almost New condition. Will Defo improve your accuracy! Posted in U.K Sold

MDT ORYX chassis for a T3/X About a month old comes Boxed with all the paperwork and have original receipt in almost New condition. Will Defo improve your accuracy! Posted in U.K

Selling as changed over to MDT Onyx Stock..selling my In near New condition apart from the odd minor marks Also on sale elsewhere. Posted in U.K More info from the internet below: The VT design is a synthesis of design elements requested by you, the customer, for a thumbhole design. With a large rollover cheek piece for scope usage and straight comb design to minimize cheek slap when shooting, the hand conforming thumbhole allows for increased accuracy while distributing the recoil among the palm and shoulder. This minimizes muzzle jump and felt recoil. The VT has a beaver-tailed designed forend that is flat/oval in shape allowing for superior palm to forend weld to help improve off-hand shooting. It is also wide and flat enough to set up for long range bag work. Varmint Thumbhole Features: Cooling Vents - adds to the aesthetics and increases cooling area around barrel for those longer sessions at the range. Customers will have the ability to open the forend to accept barrels up to 1 1/4" wide 1/2" Rubber recoil pad for quick non-slip mounting All Finished and Unfinished Boyds' VT stocks come with 2 front and 1 rear blued swivel stud. No sharp edges on bottom of stock - gives a sleeker design and helps when shifting stock in shooting sticks Average weight of 2.8 lbs. - allows for great balance of the rifle, and only adds about 9 oz. to firearm's overall weight compared to standard plastic stocks offered by manufacturers Laboratory acid based satin finish - proven to resist chemical damage and harsh treatment from the elements The length of pull is 13 3/4" The overall length is approximately 32" Specifications: Suits - Tikka T3/T3X Sporter Profile Barrel/Varmit heavy (Detachable Magazine)

Selling as changed over to MDT Onyx Stock..selling my In near New condition apart from the odd minor marks Also on sale elsewhere. Posted in U.K More info from the internet below: The VT design is a synthesis of design elements requested by you, the customer, for a thumbhole design. With a large rollover cheek piece for scope usage and straight comb design to minimize cheek slap when shooting, the hand conforming thumbhole allows for increased accuracy while distributing the recoil among the palm and shoulder. This minimizes muzzle jump and felt recoil. The VT has a beaver-tailed designed forend that is flat/oval in shape allowing for superior palm to forend weld to help improve off-hand shooting. It is also wide and flat enough to set up for long range bag work. Varmint Thumbhole Features: Cooling Vents - adds to the aesthetics and increases cooling area around barrel for those longer sessions at the range. Customers will have the ability to open the forend to accept barrels up to 1 1/4" wide 1/2" Rubber recoil pad for quick non-slip mounting All Finished and Unfinished Boyds' VT stocks come with 2 front and 1 rear blued swivel stud. No sharp edges on bottom of stock - gives a sleeker design and helps when shifting stock in shooting sticks Average weight of 2.8 lbs. - allows for great balance of the rifle, and only adds about 9 oz. to firearm's overall weight compared to standard plastic stocks offered by manufacturers Laboratory acid based satin finish - proven to resist chemical damage and harsh treatment from the elements The length of pull is 13 3/4" The overall length is approximately 32" Specifications: Suits - Tikka T3/T3X Sporter Profile Barrel/Varmit heavy (Detachable Magazine)

It’s in exceedingly newish condition,fitted original mounts,single shot tray and leaflet. I’ve never used it..if it’s found to be any thing but other..I will of course get that rectified at my expense! This is being sold for my Charity Sane ..I’d like all the proceeds to go Directly to them, I’m more than happy to meet some distance to hand over if that’s what it will takes. £800 would be great,hence advertised elsewhere also. Thanks