-
Content Count
316 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Gun Dealer's and Fieldsports Shop's
Reloading Room
Blogs
Calendar
Store
Classifieds
Posts posted by quicksilver
-
-
I have used a t8 for a couple of years without problems , changed my rifle and bought a 3rd eye tactical nice mod and a reasonable price too
-
I haven't played paint ball for a good few years , I have some gear in the garage , must it be in test , are you after the bottle for the marker ?,
-
I like the lightforce 170 100w scope mount which I use both on and off the rifle
-
I have had this a couple of times in my cz but mainly with winchesters, stopped using them
-
I believe there are very few instances where 243 will be granted for fox in ni. Your best bet may be to get a 223 , do your dsc and then apply for 243 for deer and try to get it added for fox.
-
If it is the same as newer 202, then the process is to remove the quick release sling swivel. There is a Allen key that is approx 6-7 inches. It is used to remove the Fore end and will allow you acces o remove the barrel etc.
Google Sauer 202 manual and you will be able to download the info
-
-
Poacher can you let me know the make etc and how much you are after. There shouldn't be any postage restrictions on the pistol if it is red or orange.
-
Shamo Is there a dummy included with it?.
-
hi guys
Hopefully someone has a dummy launcher and a starter pistol in the garage that they no longer need and would be willing to sell. i dont think it is worth me buying a new one due to the limited use it would get.
regards
keith
-
That's what I found informative tbh
-
I have the 202 elegance in 6.5x55 and it will group well any rounds you can fit in the chamber from 95gr-140gr. I liked the rifle so much I changed my 223 to a Sauer 202 and can't see me changing either anytime soon
-
Enjoyed watching the videos thanks for posting
-
Enjoyed watching the videos thanks for posting
-
When I first tested the hardox before I got shapes cut out, I shot it at 200m (just to be sure) with my223 and had to look very closely to see the poi. I couldn't believe how hard it was. The 6.5 didn't make much more of a visible mark.
I normally spray the targets white to see the impact. At 300m I was able to observe the shock wave on a steel target. The paint which had about 20mins drying time fell off the target in a visible wave after the bullet strike. The paint fell off the entire length of a fox profile target
-
Obviously the type of steel plays a big part. I have 10mm hardox targets and a 6.5 x55 hardly scores it.
-
Sorry for the delay badger, the 6.5x55 is an sauer 202 elegance and the length of the rifle from crown to but is 111cm without a mod. With the jtec ranger it is 128 cm. I shoot a 202 outback in 223 which is 107cm without the third eye tactical and 127 with the mod fitted. I like the 3rd eye for build quality length and weight but haven't used it on anything bigger than 223
Keith
-
I won't reduce tr overall length at all, I will measure the rifles with and without the mod later this evening.
-
I use a jtec ranger on my 202 and find it good and light but it is still a little long. I also have a 3rd eye tactical mod on my 223 sauer 202 and I am happy with it overall
-
-
Was out last night after rabbits and there were approx 5-7 rabbits sitting at the bottom of a bank at 188m. I am zeroed at 100 but I don't know the drop at ranges past 120m for 17hmr and didn't take any shots. Has anybody a range card for hmr .
-
There are some good breeders from Scotland so you should be able to get all the info you need trudvang is a kennel that keeps coming up
-
Is it a slat mill or electric you are after, I made a slatmill quite a few years ago for a suluki greyhound but it was a one off due to the size etc. I have a electric mill that was made as test , it needs a dc speed controller but apart from that is good to go, you can get a gym treadmill speed controller for about £100 if u are interested send me a pm
-
What size are you after. What you running on it.
Manlicher Pro Hunter Mk2
in Rimfire, Centrefire & Shotguns
Posted
Had one in 223 and never liked it. It had feed problems from the mag and was quite fussy about what bullets it grouped. On the plus side I liked the sbs bolt arrangement that allowed the bolt to be operated with the safety activated