Jump to content

quicksilver

Members
  • Content Count

    316
  • Joined

  • Last visited

Everything posted by quicksilver

  1. Had one in 223 and never liked it. It had feed problems from the mag and was quite fussy about what bullets it grouped. On the plus side I liked the sbs bolt arrangement that allowed the bolt to be operated with the safety activated
  2. I have used a t8 for a couple of years without problems , changed my rifle and bought a 3rd eye tactical nice mod and a reasonable price too
  3. I haven't played paint ball for a good few years , I have some gear in the garage , must it be in test , are you after the bottle for the marker ?,
  4. I like the lightforce 170 100w scope mount which I use both on and off the rifle
  5. I have had this a couple of times in my cz but mainly with winchesters, stopped using them
  6. I believe there are very few instances where 243 will be granted for fox in ni. Your best bet may be to get a 223 , do your dsc and then apply for 243 for deer and try to get it added for fox.
  7. If it is the same as newer 202, then the process is to remove the quick release sling swivel. There is a Allen key that is approx 6-7 inches. It is used to remove the Fore end and will allow you acces o remove the barrel etc. Google Sauer 202 manual and you will be able to download the info
  8. Poacher can you let me know the make etc and how much you are after. There shouldn't be any postage restrictions on the pistol if it is red or orange.
  9. hi guys Hopefully someone has a dummy launcher and a starter pistol in the garage that they no longer need and would be willing to sell. i dont think it is worth me buying a new one due to the limited use it would get. regards keith
  10. That's what I found informative tbh
  11. I have the 202 elegance in 6.5x55 and it will group well any rounds you can fit in the chamber from 95gr-140gr. I liked the rifle so much I changed my 223 to a Sauer 202 and can't see me changing either anytime soon
  12. Enjoyed watching the videos thanks for posting
  13. Enjoyed watching the videos thanks for posting
  14. When I first tested the hardox before I got shapes cut out, I shot it at 200m (just to be sure) with my223 and had to look very closely to see the poi. I couldn't believe how hard it was. The 6.5 didn't make much more of a visible mark. I normally spray the targets white to see the impact. At 300m I was able to observe the shock wave on a steel target. The paint which had about 20mins drying time fell off the target in a visible wave after the bullet strike. The paint fell off the entire length of a fox profile target
  15. Obviously the type of steel plays a big part. I have 10mm hardox targets and a 6.5 x55 hardly scores it.
  16. Sorry for the delay badger, the 6.5x55 is an sauer 202 elegance and the length of the rifle from crown to but is 111cm without a mod. With the jtec ranger it is 128 cm. I shoot a 202 outback in 223 which is 107cm without the third eye tactical and 127 with the mod fitted. I like the 3rd eye for build quality length and weight but haven't used it on anything bigger than 223 Keith
  17. I won't reduce tr overall length at all, I will measure the rifles with and without the mod later this evening.
  18. I use a jtec ranger on my 202 and find it good and light but it is still a little long. I also have a 3rd eye tactical mod on my 223 sauer 202 and I am happy with it overall
  19. Was out last night after rabbits and there were approx 5-7 rabbits sitting at the bottom of a bank at 188m. I am zeroed at 100 but I don't know the drop at ranges past 120m for 17hmr and didn't take any shots. Has anybody a range card for hmr .
  20. There are some good breeders from Scotland so you should be able to get all the info you need trudvang is a kennel that keeps coming up
  21. Is it a slat mill or electric you are after, I made a slatmill quite a few years ago for a suluki greyhound but it was a one off due to the size etc. I have a electric mill that was made as test , it needs a dc speed controller but apart from that is good to go, you can get a gym treadmill speed controller for about £100 if u are interested send me a pm
  22. What size are you after. What you running on it.
×
×
  • Create New...