clivej

Hi Bigad. I really need to get one of those adaptors. Can you please post a link to where you got it from.

I've had the cheap sony e700 cam and the one from sure24 is 5 times the camera and worth every cent. EG. 50y effective shooting range with the cheap cam. 200y plus with the sure24 cam. The one from sure24 has a menu system where you can alter the internal setting to better suit NV shooting. And yes the lads at NVUK have put the sure24 cam into the NS50 with fantastic results. View out to 700y easy

Just to bump this up to get a reply

I have a Dedal 200 NV scope that I use for spotting with. The IR on the Dedal 200 doesn't work so I have a Nightmaster 800 IR fitted to it for illumination and I can see the foxes out past 200y using this setup. I really want to use it on my rifle as a scope for fox shooting. But I find there's just not enough magnification to take the longer shots. I can see the fox OK but at 100y it's a small enough target to take a humane shot. Is there anywhere I can get a lens that will double (or more) the magnification?? I'm sure the objective is 100mm.

I'm trying my best to locate a 'Hornady Lock n Load AP' press to buy but not having much luck. Anyone a lead to where they can be bought and are in stock???

Should I skin the Head as well - to help it along???? Season is over here now until the 1st September

I know, I know but i didn't have 500 to spend on it

Hi all, I shot this nice Fallow a while back and as this is likely to be my best Fallow ever I'm keeping the head. Now I have no way of boiling it off and don't fancy doing it anyway so I have it hanging up, neck upwards, between branches in a tree in the back garden, a big garden backing onto farm land. High enough that foxes won't get to it. I was/I'm just doing a skull and antlers head to hang on my shed. The head was cut off at the neck just behind the ears. My intention is to leave it there until it is picked clean over the summer months. Will this work???? Should I have skin

Great gun and worth the wait to get it. Did you look at the 16" varmint version good gun as well. Here's mine with a Bushnell 10x40 3200 elite with the tactical turrets and custom stock. SAK mod and Harris 13-27" bi-pod. It shoots 1/2" @50m all day

As above but add in a couple of up clicks and you will be almost there. Then after you have got your zero to the range that you want to shoot at RESET the turret reading to zero, NOT the turrets, just the dial reading the zero. Then you have your scope zeroed and can dial in up or down for different ranges and return to your zero every time.

NO thats the 10112 putty the 10110 is more of a peanut butter thickness and works well around the action.

I'm looking to buy some Devcom 10110 epoxy steel putty to bed a rifle. Any ideas where I can buy the stuff??????????

Deleted post

This is what I now have, got the license for it last November. Sako 75 varmint (laminated) in 308, it should have had the laminated stock but came with the synthetic stock as shown. But this is what I bought off e bay for the Sako 75 308 a laminated stock. I'm going to get it pillar bedded first before putting it on the rifle.

Deleted post