what bar to fill to

[iguanaman2442 0]

Hi does anybody know what bar i should be filling my falcon fn12 to

Dont have the manual cant seem to find any info on line.

 

Cheers Rob

[Grim Reaper 1]

Hi does anybody know what bar i should be filling my falcon fn12 to

Dont have the manual cant seem to find any info on line.

 

Cheers Rob

 

 

Hi Rob,

 

From the little bits i can find about it, i believe there should be a filling pressure marked out on the left side of the action - now wether that is in Bar or PSI is anyone's guess of course, but it should be stamped on the left side of the action somewhere?

 

 

Hope this is of help to you mate?

 

 

 

Regards,

Grim.

[milo2005 0]

my mate fills his to 190bar ,work for him

[iguanaman2442 0]

Cheers Lads.

 

Yeah Grim so it does cheers mate teach me to look on the gun before i rush to

ask you knowlegeable lads for help.

 

Cheers Iguanaman

[ghillies 209]

its a 200 bar cylinder, if memery serves i think it is 190... though 180 will save you waisting the more eratic shots at the biggining of the power curve..

 

to find where to fill too and shoot down to you'll need a chrono, shoot a full fill and stick the results on a gragh.. draw a line through the center of the string of dots and you'll where the best starts to happen.. hmmm cant remember off hand wat per shot takes, but divide a fill by the shots you get.. it'll be there some where.

[Grim Reaper 1]

Cheers Lads.

 

Yeah Grim so it does cheers mate teach me to look on the gun before i rush to

ask you knowlegeable lads for help.

 

Cheers Iguanaman

 

 

No worries - glad to have been of help to you pal.

 

That is what this place is for, after all - helping one another.

 

 

 

Regards,

Grim.

Edited February 19, 2009 by Grim Reaper

[sauer 2]

just rule of thumb guys for difference between PSI or BAR if it s 3 digit figure for filling its most likely BAR

 

if its a 4 digit figure it will be PSI

 

1 BAR = 14.7 PSI

 

rough guide 200 BAR = roughly 3000 PSI (2940 ish )

 

and if you dont work with pressure never feck bout with pressures like these to put it into context your car tyres are roughly 30 psi !!!!!!

so be careful when handling dive cylinders or the like

 

 

sauer