Weihrauch HW77k Underlever Bar?

[Jayd 0]

Hi all,

 

I've noticed the underlever has started to not fit in the catch underneath the silencer. Is there something I can do to cure this by trying to push it back with some sort of padded vice, or is it a strip down job, or will I have to send it to a gunsmith?

 

Thanks.

[stealthy1 3,964]

Check the underlever's not bent, 77's seem prone to this, give the catch a good spray with WD40 to get rid of the crap, hope this helps, worked on mine.

[Jayd 0]

Check the underlever's not bent, 77's seem prone to this, give the catch a good spray with WD40 to get rid of the crap, hope this helps, worked on mine.

 

Thanks for your reply. If it's bent, is it time for new, or can it be fettled?

[stealthy1 3,964]

Check the underlever's not bent, 77's seem prone to this, give the catch a good spray with WD40 to get rid of the crap, hope this helps, worked on mine.

 

Thanks for your reply. If it's bent, is it time for new, or can it be fettled?

 

If its bent a gunsmith will sort it for you no problem, my old 77 did the same thing, just would'nt settle in the catch, and you could only just see the bend.

[Jayd 0]

Thanks for your advice. I'll have a proper look tomorrow, and will get onto a gunsmith if needs be.

 

Thanks again.