ferretville 69 Posted July 17, 2008 Report Share Posted July 17, 2008 Took my AAs410k .177 back to the gun dealers as it has dropped in power . Had it on three different chronographs and it was reading 9.43 on average. Lucky if it reached 10 using bisley mags. Could of had a full refund there and then but from the gun dealer but we agreed to send it off to AAs and see what they can do my guess knowing them feck all. Anyway gundealer said when it comes back we will take a look and see what its doing and i can get some shooting in with it and if i`m still unhappy with it then he will refund me my money. It is`nt loosing air which has me puzzled because if it were then that would explain a drop in power but nope nothing wrong there really pissing me off as i really like this gun. Just hope AAs can sort it out have a replacement to use from the shop but it just is`nt the same as your own. Me mate had alot of bother with AAs when his was only doing 8 on the chronograph brand new aswell sent back to AAs they sent it back out saying it was at a acceptable level twice it went back before they sent out a new gun. Hope i don`t have to go through the same shit he went through real shame as these guns are a gem to use fingers crossed guys. Any of you`s had similar problems or problems with AAs cheers FV Quote Link to post
Coney 3 Posted July 17, 2008 Report Share Posted July 17, 2008 My pal "goldenarms2 had some real problems with his new 400, blew a seal, away x3 weeks and came back at around the 9lb mark....but he might be able to tell you more if you drop him a PM??? Quote Link to post
ferretville 69 Posted July 17, 2008 Author Report Share Posted July 17, 2008 Cheers coney had a feeling there would be others out there who had encountered problems. No way was i shooting with the gun doing 9.43 it just ain`t right and humane on your quarry . The shop said it should be about 10 days personally think it will be longer . Its got me head done in . Quote Link to post
goldenarms 0 Posted July 18, 2008 Report Share Posted July 18, 2008 Cheers coney had a feeling there would be others out there who had encountered problems. No way was i shooting with the gun doing 9.43 it just ain`t right and humane on your quarry . The shop said it should be about 10 days personally think it will be longer . Its got me head done in . My local gunsmith told me airarm,s guns are set at 9.4 new dont know why, When i bought mine the shop chrono it at 9.4 they put it up to 11.6 as coney explained i had problem,s with it when it came back guess what.!!!!!! shooting at 9.4 again but my local shop changed it back to 11.6 i was lucky mine has,nt got the anti tamper screw on it. Quote Link to post
Guest rexdigger Posted July 18, 2008 Report Share Posted July 18, 2008 Cheers coney had a feeling there would be others out there who had encountered problems. No way was i shooting with the gun doing 9.43 it just ain`t right and humane on your quarry . The shop said it should be about 10 days personally think it will be longer . Its got me head done in . My local gunsmith told me airarm,s guns are set at 9.4 new dont know why, When i bought mine the shop chrono it at 9.4 they put it up to 11.6 as coney explained i had problem,s with it when it came back guess what.!!!!!! shooting at 9.4 again but my local shop changed it back to 11.6 i was lucky mine has,nt got the anti tamper screw on it. nothin what a dremal cant sort lol :whistling: Quote Link to post
andy s410c 63 Posted July 18, 2008 Report Share Posted July 18, 2008 Bit of a pisser that FV the way the weather is at the minute i don,t think you,ll miss much.Hopefully the gun will be back asap & get the ft/lb sorted i woulnd,nt change my 410c for any other make of gun on the market at the moment...just hang on in there mate Quote Link to post
ferretville 69 Posted July 19, 2008 Author Report Share Posted July 19, 2008 Cheers coney had a feeling there would be others out there who had encountered problems. No way was i shooting with the gun doing 9.43 it just ain`t right and humane on your quarry . The shop said it should be about 10 days personally think it will be longer . Its got me head done in . My local gunsmith told me airarm,s guns are set at 9.4 new dont know why, When i bought mine the shop chrono it at 9.4 they put it up to 11.6 as coney explained i had problem,s with it when it came back guess what.!!!!!! shooting at 9.4 again but my local shop changed it back to 11.6 i was lucky mine has,nt got the anti tamper screw on it. Mines does`nt have the anti tamper screw on it either GA at the gun shop tried opening the valve on the side no joy needs turned up internally mate. Like i say me mates gun was brand new s410 in .22 and it was doing 8 what a piss take . ATB FV Bit of a pisser that FV the way the weather is at the minute i don,t think you,ll miss much.Hopefully the gun will be back asap & get the ft/lb sorted i woulnd,nt change my 410c for any other make of gun on the market at the moment...just hang on in there mate Hope it gets sorted andy as i really like the s410 fingers crossed mate FV Quote Link to post
countrycommando89 7 Posted July 19, 2008 Report Share Posted July 19, 2008 my s400 was shooting at 9.9 but i have a suspicion this is what it was shooting out of the box. got it back to airarms and they stuck it up to 11.3 Quote Link to post
tango 221 Posted July 19, 2008 Report Share Posted July 19, 2008 Cheers coney had a feeling there would be others out there who had encountered problems. No way was i shooting with the gun doing 9.43 it just ain`t right and humane on your quarry . The shop said it should be about 10 days personally think it will be longer . Its got me head done in . My local gunsmith told me airarm,s guns are set at 9.4 new dont know why, When i bought mine the shop chrono it at 9.4 they put it up to 11.6 as coney explained i had problem,s with it when it came back guess what.!!!!!! shooting at 9.4 again but my local shop changed it back to 11.6 i was lucky mine has,nt got the anti tamper screw on it. nothin what a dremal cant sort lol :whistling: my s400 has went tits up also,there is ascrew on the side of the cocking mecanism on it,i cant get it graphed round here at all,does anyone have anyother ideas Quote Link to post
ferretville 69 Posted July 20, 2008 Author Report Share Posted July 20, 2008 Pisser ain`t it tango when your gun go`s to pot no gun shops round your way mate. Quote Link to post
tango 221 Posted July 21, 2008 Report Share Posted July 21, 2008 Pisser ain`t it tango when your gun go`s to pot no gun shops round your way mate.THERE IS LAD BUT THEY NO SHIT ALL ABOUT PCPs AND NONE HAVE A GRAPH Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.