FERRETBOY 680 Posted March 21, 2008 Report Share Posted March 21, 2008 (edited) i might be able to get a basket made up from a steel place near where i work,but im just after some pics of yours you have made yourself ,not the common mass produced ones lol.i can remember basket with the conpartments for three or more nets but cant remember who put it up.also when your basket is loaded with three nets at differant sizes ,do you have to use the nets in order they have been placed in the basket.cheers good hunting rew Edited March 21, 2008 by REW Quote Link to post
stubby 175 Posted March 21, 2008 Report Share Posted March 21, 2008 I'll go and take some pics for you, dont know if they will be any good, loaded with the nets in, and I aint taking them out (big tangles that way) or Ill take some tomorrow once the nets have been put out I have a home made one, made by a guy called rambo, he used a keep/landing net for the bag, Ive since changed it, and made a proper bag for it, holds a 100yd'er the other is a magnum, proper job, holds a 50yd'er, then Ive placed another net bag, on top of that net, and loaded a 25yd'er in, that way if I want the 50yd net first, its just a case of grabbing the 5 poles (marked with tape) and lifting the bag out and place on floor, then use the basket Quote Link to post
para1 11 Posted March 22, 2008 Report Share Posted March 22, 2008 i might be able to get a basket made up from a steel place near where i work,but im just after some pics of yours you have made yourself ,not the common mass produced ones lol.i can remember basket with the conpartments for three or more nets but cant remember who put it up.also when your basket is loaded with three nets at differant sizes ,do you have to use the nets in order they have been placed in the basket.cheers good hunting rew A few pics mate.This is my first effert each post is put away or taken out in turn and stays in turn. it is set up for a 20yds in front 35yds at rear.Not tangled yet, early days.I must use one to get to other.Hope it helps Quote Link to post
para1 11 Posted March 22, 2008 Report Share Posted March 22, 2008 2nd effort,basket will not be net as gets caught on every thing.This will be for 100yds or 2 50s poor pics from phone.I'm much better at catching rabbits Quote Link to post
FERRETBOY 680 Posted March 22, 2008 Author Report Share Posted March 22, 2008 nice design para1 ,show us some pics stubby.cheers good hunting rew Quote Link to post
para1 11 Posted March 25, 2008 Report Share Posted March 25, 2008 nice design para1 ,show us some pics stubby.cheers good hunting rew Well rew hoped that we would see a few ideas there. Perhaps there aren't as many people with quick sets as we taught ?? good luck and good hunting P1 Quote Link to post
Guest Magwitch Posted March 26, 2008 Report Share Posted March 26, 2008 here's a magnum Quote Link to post
stubby 175 Posted March 26, 2008 Report Share Posted March 26, 2008 sorry rew, forgot to take the pic's, but magwitch has kindly done it for me Quote Link to post
DEL 5 Posted March 26, 2008 Report Share Posted March 26, 2008 make it as light as pos,i have a magnum with 100 yrds of netting init and its quit heavy Quote Link to post
stubby 175 Posted March 31, 2008 Report Share Posted March 31, 2008 cleaning out one of the sheds, Ive just found some sparrow netting which i forgot i had, used at work for bird proofing its the same stuff that the basket net is made from, so if you or anyone needs some, give me a shout, it'll be cheaper than cost (plus p&p) and finish your basket off nice here's some pics for REW, its a homemade basket by a guy called RAMBO from another forum, it did have a landing net type thing under it, which I took off, and made a proper net base, using the sparrow net Quote Link to post
FERRETBOY 680 Posted April 1, 2008 Author Report Share Posted April 1, 2008 cheers mate .looks a tidy job. good hunting rew Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.