Malt 379 Posted February 16, 2008 Report Share Posted February 16, 2008 Thanks for the reply Bill. I was just going on the figures I read somewhere. Where did you get the custom parts, if you don't mind me asking? The only parts I could find were in the states. I wouldn't mind converting mine to bulk fill. Any advice would be appreiciated. Theres a few Malt, TR Robb,in the uk,and Crooked Barn in the states.If i was you i would try the link below,they have everything you need to tune the rattys,and the guy that runs it really knows his stuff.Word of warning tuning rattys can go on and on,and be quite expensive. http://www.sdcustomdesign.com/index.htm I've spoken to Steve before, via Email. There's some cracking custom guns on his site. I was hoping to get a full length barrel off him. I'm not sure if I could get one sent through the post now though! Thanks again for the info! Go for it Malt,order the 24inch barrel,and if they question it tell them its a poker. That's the only problem, it'll look daft! but that Steve told me that with the right pellets, she'll push out around 11.5 ft/lbs! Quote Link to post
Ballybricken 1 Posted February 18, 2008 Report Share Posted February 18, 2008 Haha your not joking, once you start fiddling with them its hard to stop hence why I have 2 and wouldnt mind another! Fancy a long barrelled number with wood furniture and a 4x40 scope for the next one. My kitted one has a hawke sd red dot on it and the other once just has the field sights , did have a scope on but I cant get on with the bloody pro-blocks so they came off 10 mins after it arrived Quote Link to post
AKeeNShoT 5 Posted November 25, 2008 Report Share Posted November 25, 2008 i have two rats standard and modded, standard chrons 1st 3 pellets between 8.5ftlbs and 8.2ftlbs, the next 10 pellets are pretty consistent at around7.7-8 ftlbs, the power drops quite alot in the next 10 to to around 6ftlb before it empties, all in all about 23 shots. standard pic Quote Link to post
AKeeNShoT 5 Posted November 25, 2008 Report Share Posted November 25, 2008 (edited) now my modded rat with barrel, breech, bolt and valve mods, hits pretty consistently between 10.9 and 10.5 for the full 18 shots before it empties. i have had it at 11.2ftlb, but only once with aa fields modded pic more than, quote "more than" adequate for pretty much all small vermin control, but not in excess of 30-35 yds and probably 20-25 yds in standard flavour, and of course you know your killzones inside out and are AKeeNShoT. who was worried the 24" barrel would look daft?? what do ya reckon now Edited November 25, 2008 by AKeeNShoT Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.