Air Arms S200 Trigger

[gary.l 61]

Hi all, I got my new s200 today, everythings good but I'm not too fond of the trigger, the 1st stage is to heavy so it goes off before I feel a stop for the second stage, it's like a mushy single stage trigger with a lot of creep if that makes any sense, I'd prefer the first stage to be nice and light so I can feel a definate stop when the second stage comes in and then a crisp break. The manual says not to go near the first stage setting so I'm unsure whether I should try to adjust it or not, and whether the adjustment screw for it will actually lighten the pull weight, or just shorten the creep. Any tips? Thanks.

[neil82 1,008]

join the AIRARMS OWNERS CLUB forum and look for Raj`s posts, he`s one of the good guys when it comes to s200`s, you`ll never get it as good as you can get a s4** series trigger but you can improve it a lot

[gary.l 61]

Thanks Neil, I'm answering my own question here but basically what I did was, I cocked the rifle(unloaded) and wound in the 2nd stage screw until the rifle fired, then I backed the screw out maybe an eigth to a quarter of a turn and recocked it unloaded to make sure it didn't fire when cocking it. It's a nice light crisp single stage trigger now!!!

[Essveekay 0]

I had the same. Put a Rowan engineering on mine and made all the difference.