Daystate Huntsman Mk1

[Micheal Bell 16]

Right guys im after some help.

Ive been donated a early MK1 daystate huntsman.

and its a full restoration project and im after some help finding some parts that are missing.

I have contacted daystate with no luck and also Staffordshire custom air rifles and the air gun doctor to try and track down these parts but no luck at all. im hope in that some one on here will either have these parts or know where i can get these parts from.

This poor rifle has been abused by the weather and forgot about and its time to breath life back into her.

The breach is in a bad way but the cylender is ok the rust on it wiped off and is in very good condition photo makes it look bad.

the parts needed are as followed

 

:Brass breach bolt knob/handle

:breachblock

saftey fixing screw

:saftey catch

:saftey catch ball bearing and spring

 

Any help would be greatly appreciated

Thank you

Edited June 19, 2015 by Micheal Bell

[Durham John 693]

have you tried any of these,

 

http://www.daystateforum.com/

 

http://v2.daystateowners.com/

 

https://www.(!64.56:886/pages/The-Daystate-Owners-Club/222732494437730

 

probably get more help with the parts you need as i would think they are now prity rare if daystate cannot help you.

 

regards John

[Micheal Bell 16]

Cheers Durham John, yea ive posted on them as well and no response.