Nathan1991 25 Posted March 18, 2014 Report Share Posted March 18, 2014 Hey guys, After a very frustrating few weeks with my refurbished hw35, I decided to strip it down again for the millionth time and fine tune it I started with making 2 nylon washers, one to be threaded onto the spring guide and one to be in the piston, this took hours as I made sure they were an absolute perfect fit, I also got some 0.5mm aluminium and made a piston sleeve, I then cut 5 coils from the spring and spent about 2 hours finishing the end so it sits really nice, after that I give a general Relube and lastly I dismantled the rekord trigger and give it a deburr and polish so it is now buttery smooth , I then re assembled and now I am grouping 15mm at 55 yards I own a hw97kt and my hw35 is now more consistent Next job, get some practice in for the anston HFT ATB Nathan Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.