liongeorge 7 Posted March 2, 2013 Report Share Posted March 2, 2013 Hi all , haven't been on here for ages. Glad to see there's still plenty of action going on out there. I have a MK3M (magnetic) collar that is a few years old that stated messing about, not working then working when you pressed it together. At first I thought it was just the little connector tab inside so I adjusted this and it worked so I thought great . Then the little bugger won't turn off at all and I have to take the batteries out to stop it . Has any one else had this problem, do you think it's worth sending back to Deben to check it out even if it's out of warranty? Any ideas appreciated George. Quote Link to post
AirgunGuy 362 Posted March 2, 2013 Report Share Posted March 2, 2013 (edited) I dont think there's much to the mk3m collars. Probably something to do with the magnet inside the collar or the box if it wont turn off. Try callin Deben 1st to get an idea of problem and cost to repair if repairable. I called them recently as my collars are about a foot out though workin perfectly otherwise. Had a few digs recently and they were spot on but it is going to them for recalibration. Edited March 2, 2013 by AirgunGuy Quote Link to post
AirgunGuy 362 Posted March 2, 2013 Report Share Posted March 2, 2013 Forgot to add...have you tried it with the magnet on the end of the box and the wee separate maget that comes with them? Quote Link to post
liongeorge 7 Posted March 2, 2013 Author Report Share Posted March 2, 2013 I have just used the magnet on the end of the finder , the other 'wee' one is long gone. I'll try it with a small strong pick up magnet I have and see what happens. cheers G Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.