fill adapter problem s200 need help please read

[123hw80 9]

hi all i tryed to charge my s200 with a pump with a new fill adapter it got to 50 bar n wouldn't go higher and then just leaked out so tuck gun to shop had new fill seals n my fill adapter works with a divers bottle but not my pump so i asked if i could try the adapter on a different gun and it works fine so my pump works my adapter works but they wont work together bloke at gun shop said he dosnt have a clue so can anyone help me out

 

 

thanks you

[robwelsh 354]

Where the fill adaptor screws into there should be like a ptfe bit in the hose connector, make sure everything is nipped up tight

[ledders666 6]

Unscrew the resivior. then charge it. I had this problem when i bought the gun new even with a dive bottle. Below around 60bar the resivoir will just empty. However if you take it off then charge it it cant leak out. You will only have to do this once after that dont let the pressure drop that low I usually charge mine between 90-110bar.