Vx vermintator leaking issues

[joshc123 45]

So i have noticed were i put the fill adaptor into the gun there is a small leakage its not leaking much but it's deffo a leak could you tell me a rough estimate how much this would cos to repair and is there anything i could do at home to fix it?

[barrywhite 282]

fx owners could help. Looking at pictures ect , it looks like the front bottle part screws of like a hw 100 or a buddy bottle on a theoben .I turned my front cylinder on my fx a little just to see if it moved and with no air in the gun it rotated esey just a bit to see.tThe bit where the filler goes unscrews from the body of the little front bottle .Then you can replace o rings.Look on fx owners also the fx gladiator is similar .I have a verminator never had to fix it yet .just put in a new breech seal that was a little worn .

[barrywhite 282]

also you may have dirt trapped in the filler valve not letting it shut properly .you may if lucky empty the gun of air and fill again .the quick blast of air may clear it.but that will push the problem in to gun and may cause another problem later .

[joshc123 45]

There was dirt in the filter valve all done now lads cheers