bobafet 30 Posted February 19, 2011 Report Share Posted February 19, 2011 (edited) Is it standard markings on all chokes, i cant remember how the guy in the shop explained it to me when i asked about what chokes to use for steel shot, im feeling a bit thick is this how it goes... one notch = full two = 3/4 three = 1/2 four = 1/4 five = cyl Edited February 19, 2011 by bobafet Quote Link to post
DERBOY 18 Posted February 19, 2011 Report Share Posted February 19, 2011 correct no notch ex full Quote Link to post
sibaldib 6 Posted February 20, 2011 Report Share Posted February 20, 2011 Some European manufacturers use asterisks or stars stamped on to the chokes, but they equate to the above notches (thankfully) Sib Quote Link to post
DERBOY 18 Posted February 20, 2011 Report Share Posted February 20, 2011 im sure its 1/2 choke max for steel shoot . un less some one knows any diff. Quote Link to post
dai bando 2 Posted February 20, 2011 Report Share Posted February 20, 2011 My Laurona has no notches for cylinder. Quote Link to post
tonymantaner 0 Posted February 20, 2011 Report Share Posted February 20, 2011 My Laurona has no notches for cylinder. has that mixie cleared up mate Quote Link to post
dai bando 2 Posted February 24, 2011 Report Share Posted February 24, 2011 My Laurona has no notches for cylinder. has that mixie cleared up mate I had a cold u stalker 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.