woodsy101 0 Posted February 14, 2011 Report Share Posted February 14, 2011 Hi, I have picked up a webley axsor a few months ago, a bit ago the barrel became loose, it was a screw holding the barrel to the air chamber but seems to be very loose in the threads, is there any way of repairing it? cheers Elliott. Quote Link to post
matt_hooks 188 Posted February 14, 2011 Report Share Posted February 14, 2011 Is it the one that you access through the filling port? If so, pm me your address and I'll sling a couple in the post to you. Get some red loctite, put a little on the thread and tighten it up, it should stay tight. If it's not that one, then I'd still say loctite, it's not too expensive, and is great for making sure things stay nice and tight! Quote Link to post
woodsy101 0 Posted February 15, 2011 Author Report Share Posted February 15, 2011 Is it the one that you access through the filling port? If so, pm me your address and I'll sling a couple in the post to you. Get some red loctite, put a little on the thread and tighten it up, it should stay tight. If it's not that one, then I'd still say loctite, it's not too expensive, and is great for making sure things stay nice and tight! Its the bolt at the end of the barrel where it has a sleeve on the end which you screw the silencer into, it screws the sleeve onto the air tank its a little allen bolt, it screws from through the top, didnt know there was one you accesed from the filling port? might be a bit confusing! cheers Elliott, Quote Link to post
matt_hooks 188 Posted February 16, 2011 Report Share Posted February 16, 2011 Any chance of a pic? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.