Patterbull 8 Posted February 13, 2011 Report Share Posted February 13, 2011 Hi people recently changed my batteries and my locator at 8 ft dial when my collar is only a foot does any one know to recallbrate or fix this as Iv heard deben Dnt touch mk1 no more?? Quote Link to post
2bob 9 Posted February 13, 2011 Report Share Posted February 13, 2011 did you change the battery's in the collar and box.. Quote Link to post
comanche 3,297 Posted February 13, 2011 Report Share Posted February 13, 2011 Hi people recently changed my batteries and my locator at 8 ft dial when my collar is only a foot does any one know to recallbrate or fix this as Iv heard deben Dnt touch mk1 no more?? Guess you've tried other batteries just in case. Take the front off the box . Check that the wheel is not just spinning on its central screw . Occasionally the hole in the middle of the plastic wheel wears with age and just spins while the rest of the mechanism remains on one setting.This can be fixed with a new wheel or by rebuilding the centre of the old one with Araldite or something similar If you are feeling confident that you will not snap something carefully take out the circuit board and give it a wipe with a spirit like meths ,petrol or nail varnish remover to remove any corrosion or verdi-gri.Use a cotton bud to get behind the speaker. People on this site have made mention of folk who repair Mk1's so one way or the other you should be ok . Hope this helps and good luck . Quote Link to post
Patterbull 8 Posted February 13, 2011 Author Report Share Posted February 13, 2011 Yh Iv changed both batteries and took off the wheel but everything seems fine it was working before but since the batterie changed it doesnt Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.