walshy0988 28 Posted December 14, 2010 Report Share Posted December 14, 2010 Hi fellas ive got the fx sorted, I took it to the gunsmiths and it done.It only took a couple of days,He told me it needed a cylinder valve seal,2 x air intake seals,Exhaust seal and a new air tube inlet nut. it cost me £55 and im just waiting on my bottle coming back from test now then i can go and play. The hole in the stock was so it can be turned up he said it was at 30ft/lbs so he had to turn the nut back in to 11.9ft/lbs Walshy Quote Link to post
black recking it 730 Posted December 14, 2010 Report Share Posted December 14, 2010 Hi fellas ive got the fx sorted, I took it to the gunsmiths and it done.It only took a couple of days,He told me it needed a cylinder valve seal,2 x air intake seals,Exhaust seal and a new air tube inlet nut. it cost me £55 and im just waiting on my bottle coming back from test now then i can go and play. The hole in the stock was so it can be turned up he said it was at 30ft/lbs so he had to turn the nut back in to 11.9ft/lbs Walshy uncle had one years ago mate good but pain in the ass with the draw bolt and to change the pellets on they wee daft slug holders but you happy mate thats all that matters atb? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.