apperknowle 3 Posted October 14, 2010 Report Share Posted October 14, 2010 Aup lads, I have a cometa 300 n ive brought a scope and took the front sight off under it is a notch and a hole that goes all the way into the barrel is this so a silencer can be fitted also is there a silencer that will fit without having the end of the barrel screw cut? Thanks ATB Martin Quote Link to post
Phantom 631 Posted October 14, 2010 Report Share Posted October 14, 2010 Hi there Martin, Was the front sight plastic/polymer? If so the hole would probably have been used to allow grip of the foresight and not alow it to move left or right. Find out the diameter of your barrel and then you will be able to buy a standard Male UNF thread adaptor, that you pop on the end, screw the little grub screw and then your choice of silencer is just about any one you can think off Or you could get a push on silencer depending on diameter of the barrel. Phantom Quote Link to post
apperknowle 3 Posted October 17, 2010 Author Report Share Posted October 17, 2010 Yes it is a polymer sight but there was no screw in the top or anything that would go in the notch. Thanks for the info Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.