ginge2k6 0 Posted September 6, 2006 Report Share Posted September 6, 2006 i have acquired some picture wire and wish to now what else i need to make some fence wires and how i go about putting them together thanks Quote Link to post
Mitch 0 Posted September 7, 2006 Report Share Posted September 7, 2006 Get a board of wood, 2 nails . One at either end of the board 44' apart for fence snares, and have a little pin in the center of the two nails. will be 22' from either pin. After you have wound enough on the nails, snip little bits of and tie your bundles up. Then snip the brass in the middle, you should now have 2 bundles of brass hoops 22' long. put them into bundles of 3 and spin in an eyelet, once you done this with all you brass, removed them from there piles and spin em up. I think this is all, knowing me i would have forgetten somehting important. Quote Link to post
maty j 6 Posted September 7, 2006 Report Share Posted September 7, 2006 make sure you tie about 4 peices of string oronto them so theres 2 left of centre and 2 right this should stop them all tangling up in a big brass ball. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.