ianltz 5 Posted July 30, 2009 Report Share Posted July 30, 2009 just fitted a laser to the MFR whats the easiest way to zero this should i set zero on the scope, prop the gun up still and then move the laser dot to the pellet hole, i suppose it doesnt have a secondary zero either like a scope but should be good for hold over/under depending on where the dot falls Quote Link to post
Guest Scuba1 Posted July 30, 2009 Report Share Posted July 30, 2009 The way that you have that laser mounted on the gun is about as bad as it can get. Its way to far under the barrel. You want to be as close to the bore as possible. Download " Chairgun" from Hawke and have a look at it as that will explain what I am on about. HTH Michael Quote Link to post
ianltz 5 Posted July 30, 2009 Author Report Share Posted July 30, 2009 The way that you have that laser mounted on the gun is about as bad as it can get. Its way to far under the barrel. You want to be as close to the bore as possible. Download " Chairgun" from Hawke and have a look at it as that will explain what I am on about. HTH Michael downloaded chairgun, im still none the wiser Quote Link to post
Guest Scuba1 Posted July 30, 2009 Report Share Posted July 30, 2009 Ok I'll try to explain. The thing with lasers is, that the beam of them is fairly straight. So is your line of sight through the scope. The path of the pellet isn't. So you now have 3 lines. The line of the scope pointed slightly down towards the flightpath of the pellet and the laser pointing up to do the same. You can get all three three to meet at one point, but as the whole thing is now set up in a sort of cross-eyed kind of way, things get very quickly out of alignment before and after this one point where all three meet. If you have problems understannding my ramblings, PM me your MSN thingy and I'll try to sort it out with you step by step. ATB Michael Quote Link to post
fraggle 4 Posted July 30, 2009 Report Share Posted July 30, 2009 whats the lamp you have on top mate, and dose it have a good range, Good luck with the laser if you get it sorted let me know how lol will be wanting one when i get the new rifle. Quote Link to post
ianltz 5 Posted July 31, 2009 Author Report Share Posted July 31, 2009 whats the lamp you have on top mate, and dose it have a good range, Good luck with the laser if you get it sorted let me know how lol will be wanting one when i get the new rifle. its a logun gun lamp mate, good bit of kit, nice beam out to 50/60 yds, comes with a pressure switch u can attach to the stock and a decent battery, Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.