AA 400 Carbine

[kk7966burton 0]

Can my 400 be modified to a multi-shot version?

I was told it could be when buying it but have since been told otherwise. Also what pressure should I fill it to? (on the gauge underneath)

Cheers.

[Guest buster321c]

You can add an after sales `Multi Mag` avaliable from here - http://www.rowanengineering.com/

 

And you should fill your rifle to about 190 ( recomended fill pressure ) but you will find that it performs slightly better when you`ve put a few through it , as the pressure drops you will hit `the sweet spot `. I have an S400 and generally fill mine to 170-180 , and use it down to , no lower than 110 , then just keep it topped up

 

 

 

Just edited to say , never go off the guage on the gun , AA are a bit dodgy with the guages and mine never reads right , ALWAYS go from the reading on the bottle , Buster

[davyt63 1,845]

You can add an after sales `Multi Mag` avaliable from here - http://www.rowanengineering.com/

 

And you should fill your rifle to about 190 ( recomended fill pressure ) but you will find that it performs slightly better when you`ve put a few through it , as the pressure drops you will hit `the sweet spot `. I have an S400 and generally fill mine to 170-180 , and use it down to , no lower than 110 , then just keep it topped up

 

 

 

Just edited to say , never go off the guage on the gun , AA are a bit dodgy with the guages and mine never reads right , ALWAYS go from the reading on the bottle , Buster

 

my sweet point on my AAS410K .22 is between 160 to 105 bar,but your my sweet!! point buster

[SEAN3513 7]

just to add to the good advice

 

the rowan mags have to be indexed manually ( you have to rotate it yourself to the next pellet, it isnt rotated when the bolt is pulled back to cock the rifle).

 

cheers

 

sean

[Guest buster321c]

Why thank you Davy

[kk7966burton 0]

Cheers lads, much appreciated