devonlad 0 Posted July 4, 2009 Report Share Posted July 4, 2009 (edited) Do any of you guys know when Falcon stopped manufacturing their pre-charged rifles with a 1/8 BSP connector for charging up, and how easy is it it to convert to a quick fill version from a 1/8 BSP version ? Edited July 4, 2009 by devonlad Quote Link to post
smokin 0 Posted July 4, 2009 Report Share Posted July 4, 2009 there are off the shelf quick fill male and femal adaptors available at your local gunshop - not overly pretty but do the job - as for a bespoke conversion to a falcon one then contact air arms it may be possible atb chris Quote Link to post
Deker 3,453 Posted July 4, 2009 Report Share Posted July 4, 2009 Perhaps I misunderstand the above post but I suggest you contact Falcon, http://falcon-airguns.co.uk/, if you contact Air Arms they will pass you to Falcon. A strange misconception exists in the market place that AA own Falcon, they do not. Some years ago NSP Engineering bought AA, a while later NSP bought Falcon, AA did not buy Falcon and do not own them, NSP own them both, and ALL 3 companies operate from the NSP site! Quote Link to post
half n' half 8 Posted July 4, 2009 Report Share Posted July 4, 2009 Do any of you guys know when Falcon stopped manufacturing their pre-charged rifles with a 1/8 BSP connector for charging up, and how easy is it it to convert to a quick fill version from a 1/8 BSP version ? http://www.best-pcpfittings-quickcouplings..._fillprobes.asp scroll down on here mate,falcon quick fill available from these fella's Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.