tyephillips
-
Content Count
102 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Gun Dealer's and Fieldsports Shop's
Reloading Room
Blogs
Calendar
Store
Classifieds
Everything posted by tyephillips
-
Hi all, anyone have a Miracle cottage or EJ230 bullet camera lying around there spares draws that they would consider selling me. Cheers and all the best. Tye.
-
as title please I am after a cheap diy night vision build ideally with a e700 camera and all other bits so can put straight on the rifle, can collect with cash and located in Essex and east London,
-
as title please don't have the time to order parts and build myself so after a standard diy setup with e700 camera and all the bits so I can just put on scope and use, ideally collected so I can view/test and pay cash ( I am located in Essex and east London ) but postage is ok, let me know what you have. cheers.
-
as title please, I have a TDR in .22 with bag Two mags and all the bits in very good condition, I believe its just before anti tamper so can be worked tuned / adjusted easy although I have not touched it as shoots spot on so if it aint broke no need to fiddle. I have added a shotgun studded barrel clamp on the butt and stud screw if u want to add a sling but can be taken off if u wish. this is a joy to shoot and one of the most point able rifles I have used and the lightest as well. at moment it has a ags 3-9 x 50 scope but can add an bsa 30mm tube 3-9 x 50 if u like. I would like to
-
Wanted Wanted Air Arms S410 Series Fill Adapter
tyephillips replied to tyephillips's topic in Gun's and Rifle's
Wxm thanks but it is the newer type and someone has kindly offered me one for postage now so will wait for that hopefully, still in search for a stirrup pump if anyone has one spare, I need a good workout on my arms anyway! -
Hi Mickey thanks for the offer mate but after petrol costs were looking at brand new prices posted to my door. cheers.
-
As above please a.s.a.p.
-
Hi need a stirrup pump to fill a s410 tdr, let me know what u got.
-
Hi guys. My son would really like a tempest for plinking in the garden and been saving he's pocket money for a while now so let me know what you got to stop him asking me for one. Cheers.
-
Hi all, I am in urgent need of a cylinder with or without back block to fit a hw80 2010 due to mine being damaged beyond repair! as said in any condition. please let me know what you have. cheers.
-
Hi all, I am in urgent need of a rear sight to fit a hw80, I believe other models also fit, as said in any condition or even not all parts included etc. please let me know what you have. cheers
-
Any offers considered
-
I need to sell/exchange these parts from my hw80 1.Vortek kit no vacseal 30, purchased June 2013. £60 posted or prefer exchange with v mach high power spring and guide etc. 2. hw80k threaded .22 barrel in very good condition ( serial starts 17542** so around 2009 I believe). not sure on value but exchange for longer .22 hw80 barrel no less than 15 inches. 3.hw weihrauch silencer with 2 very small marks as seen in photos, covered with original realtree tape that leaves no sticky residue so can peel off. £35 or exchange for smaller heavier silencer to fit 16mm barrel. 4. standar
-
I live in west london,I have done buttoning to a gun of mine . Do you past west london ever .I would like to say I will do it ,the fear I have is the responsibility ,the job it is not a big thing .The only problem I could have is if the piston is hardened but I dont think it is .most of my cutters and drills are just highcarbon steel and my lathe if it still runs is a piece of chinese rubbish. Thanks for the offer barrywhite I may take you up on that next time in the west London area but living in Essex at the moment so could be while, I going to contact v mach for details and prices etc
-
Thanks for the info but I would not like to attemp myself as not that good at that sort of thing and run the risk of perniment damage etc. the transfer port was just an experiment idea to see what sort of results and if anyone else has done it.....
-
Cheers will take a look and get back
-
Hello all, Does anybody know where i can get a buttoned piston for my 2008 hw80k or know someone competent to do it, also do you need to size the piston with buttons to the chamber together? or Is this a matter of biting the bullet and sending it to v mach? I was also reading a very interesting blog from Tom Gaylord from 2008 ( link below ) regards a transfer port experiment with several transfer port inserts that could be installed from the outside of the gun in less than a minute. http://www.pyramydair.com/blog/2008/...rt-part-2.html So just woundered if anybody has done / experimented w
-
I have looked and no "funny F thingy"
-
There is no hull stamp so presume it is a grey import as purchased second hand private so no other info. the barrel is standard 12 inches screw cut, mine says 1754*** - DE Have already check and running nice at 10.5 ftlbs
-
Hello all, I have just purchased a second hand HW80K in 22 serial number starting with 1754*** which I believe is around the end 2008 start of 2009. It is not hull stamped but has the serial number then - DE mark/stamp next to it? I have never seen this before and no info online after researching so was just wondering what it means stands for? I bow to all your superior knowledge on these things and await all replies. Cheers and all the best.
-
Would prefer the 80k model
-
Still looking
-
Ok cheers, will have a look
-
As title I am looking for a Weihrauch HW80 in .22 Ideally in the Essex or East London area but may consider postage for the right hw80, various conditions considered and states of tune etc.. Let me know what you have cash waiting. Cheers,
-
Scope now sold but Still looking for a side focus with a adjustment wheel something like a leapers swat maybe