Jump to content
Sign in to follow this  
RaiderBoy

Lets have a new show us your kit and kills topic

Recommended Posts

Here is my HW100, not much of the original gun left, completely reported, my own reg fitted, improved main valve, uprated hammer & spring with friction free glide, recrowned & threaded barrel, my own scratch built silencer, Viper side wheel scope, bipod, Deben lamp, has taken me a week to build not including the trigger work & stock weight reduction, perfoms well at 60 yards in 1/4" groups, head shots on Pigeon Rabbit & Squirrel with no problem at 60s, tested on a calm day,

chrono @ 11.49 ftlbs useing Accupells as I will run at sub 12ftlbs, but as you all know HW100s make for great FAC rifles.

foxon.

 

Nice gun mate :D

Share this post


Link to post

Yes there are some good lads on here and their always happy to help. Its a cracking looking gun and no doubt its tuned to perfection and shoots like a dream. Happy hunting :thumbs: atb bedrock

 

Your right there Bedrock, the only thing is I am now on a new project, a Daystate LR90 in .22 single shot sub 12ftlbs, they eat air & not consitent enough, so with a bit of work I shall bring her upto date, I do like the early pcps afterall I feel they saved the airgun industry, if we were left with springers I doubt we would be on here now, we would be in our workshops thinking of ways to power our guns without oily springs & p-matics that crushed your fingers.

Atb, foxon.

Share this post


Link to post
Here is my HW100, not much of the original gun left, completely reported, my own reg fitted, improved main valve, uprated hammer & spring with friction free glide, recrowned & threaded barrel, my own scratch built silencer, Viper side wheel scope, bipod, Deben lamp, has taken me a week to build not including the trigger work & stock weight reduction, perfoms well at 60 yards in 1/4" groups, head shots on Pigeon Rabbit & Squirrel with no problem at 60s, tested on a calm day,

chrono @ 11.49 ftlbs useing Accupells as I will run at sub 12ftlbs, but as you all know HW100s make for great FAC rifles.

foxon.

hi realy nice gun mate, where did u get the paint job on the barrel thats smart. ;)

atb billy

Share this post


Link to post
Here is my HW100, not much of the original gun left, completely reported, my own reg fitted, improved main valve, uprated hammer & spring with friction free glide, recrowned & threaded barrel, my own scratch built silencer, Viper side wheel scope, bipod, Deben lamp, has taken me a week to build not including the trigger work & stock weight reduction, perfoms well at 60 yards in 1/4" groups, head shots on Pigeon Rabbit & Squirrel with no problem at 60s, tested on a calm day,

chrono @ 11.49 ftlbs useing Accupells as I will run at sub 12ftlbs, but as you all know HW100s make for great FAC rifles.

foxon.

hi realy nice gun mate, where did u get the paint job on the barrel thats smart. ;)

atb billy

 

Hi Billbroon,

This is only the sticky back stuff not that fancy American paint on, I did the whole conversion on a budget, but the desired finish is not bad, it's a bit fiddely but while the gun was striped it made it easier to wrap around the barrel, looks good when pokeing through hedgerow, I had enough left to do the cylinder but I thought it would be a bit ott

foxon.

Share this post


Link to post
Was it the plastic coated tape or the fabric stuff. thanks billy

 

Hi, this is the plastic coated stuff, you can get from any RFDs or ebay.

foxon.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  
  • Recently Browsing   0 members

    No registered users viewing this page.

×