Blakloks 5 Posted March 18, 2009 Report Share Posted March 18, 2009 Anyone ever got there barrels re-blued mines are in a bit of a state with going down the shore could do with getting them re-blued. Quote Link to post
Guest Ralfy II Posted March 18, 2009 Report Share Posted March 18, 2009 Have a wander around the local engineering shops ,in your area. The finsh is all down to the preperation, depending how goo/bad the barrel is. Clean the barrel up, by sanding it, finshing with fine grade paper, or wire wool.. should be around £40 or back door (few beers) Quote Link to post
Blakloks 5 Posted March 18, 2009 Author Report Share Posted March 18, 2009 So it would have to take the blue-in off first then Quote Link to post
Guest Ralfy II Posted March 18, 2009 Report Share Posted March 18, 2009 (edited) So it would have to take the blue-in off first then Why do you want to re-blu? Depending how bad your gun is, or how good !! You need all the marks & pityin out, if any. Then buff with fine grade wet/dry , & buff on a wheel. The better polished steel, the better the Blu finish. Edited March 18, 2009 by Ralfy II Quote Link to post
Blakloks 5 Posted March 19, 2009 Author Report Share Posted March 19, 2009 Ive took alot of blue-in off because ive ben trying to get the rust off it the barrels look shit! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.