para1 11 Posted February 25, 2009 Report Share Posted February 25, 2009 If you can't get hold of good rubber pipe try cutting off the fins on the blow side leaving about 1/4" to create a little light breeze.Then route the exhaust into the blower and make up a pipe from a hover hose.Like this one Quote Link to post
para1 11 Posted February 25, 2009 Report Share Posted February 25, 2009 If you can't get hold of good rubber pipe try cutting off the fins on the blow side leaving about 1/4" to create a little light breeze.Then route the exhaust into the blower and make up a pipe from a hover hose.Like this one Quote Link to post
para1 11 Posted February 25, 2009 Report Share Posted February 25, 2009 Or what you could do is forget that and reroute the exhaust to the blow side.You would need to remove the fins on the fan to create a light breeze(or the rats might come out to fast lol) and make a pipe out of a hover tube,something like this. Quote Link to post
para1 11 Posted February 25, 2009 Report Share Posted February 25, 2009 Don't know what I did there but I'm sure you get the idea Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.