light force wireing

[lampman 7]

COULD ANYONE TELL ME WHAT THE BEST WIRE WOULD BE TO RE-WIRE MY LAMPS, IV A PAIN WHERE THE SUN DONT SHINE ,FIXING BROKEN WIRES 4 TIMES ITS HAPPENED NOW AND IM OFF, ITS NOT JUST ME ITS HAPPNED TO, I NOW A FEW OTHER PEOPLE ITS HAPPNED TO ASWELL SO ANY HELP WOULD BE GREAT... CHEERS LAMPMAN

[john hubery 9]

We sell deben lamps in the shop and have had some problems with the wiring now and again, the main problem is that the wire used in the lamps is harder than the wire they really want to use but because of the problem with over heating there hands are tied, if they can't find a soloution then we'er pretty much shafted, which end of the wire are you having problems with, the switch end or the plug end

[Guest AngelicAcid]

http://www.thehuntinglife.com/forums/index...p;hl=lightforce

 

 

This helped and a few others if I rember rightly.

[lampman 7]

We sell deben lamps in the shop and have had some problems with the wiring now and again, the main problem is that the wire used in the lamps is harder than the wire they really want to use but because of the problem with over heating there hands are tied, if they can't find a soloution then we'er pretty much shafted, which end of the wire are you having problems with, the switch end or the plug end

IT BROKE ONCE AT THE PLUG END AND THE REST OF THE TIMES UP AT THE HANDLE, I DID NOTICE WHEN I STRIPED THE WIRE THERE IS A HARD PLASTIC INSIDE THAT COVERS THE WIRE AND IT SNAPS LIKE A CARROT, WHEN THAT HAPPENS IT MUST MAKE THE WIRE WEAK, SURELY THERES SOME OTHER WIREING SET UP THEY CAN USE?

[martin 332]

We sell deben lamps in the shop and have had some problems with the wiring now and again, the main problem is that the wire used in the lamps is harder than the wire they really want to use but because of the problem with over heating there hands are tied, if they can't find a soloution then we'er pretty much shafted, which end of the wire are you having problems with, the switch end or the plug end

IT BROKE ONCE AT THE PLUG END AND THE REST OF THE TIMES UP AT THE HANDLE, I DID NOTICE WHEN I STRIPED THE WIRE THERE IS A HARD PLASTIC INSIDE THAT COVERS THE WIRE AND IT SNAPS LIKE A CARROT, WHEN THAT HAPPENS IT MUST MAKE THE WIRE WEAK, SURELY THERES SOME OTHER WIREING SET UP THEY CAN USE?

 

 

All I done was completely change the cable on mine,and,I used a piece of cable from an old Black & Decker drill.Works perfect now,I think they break because they get too hot and get a bit brittle,oh,I use a lawnmower connection as well,cos,it is much more secure............martin.

 

p.m. me if you want a picture of mine.