fox_killer_06 0 Posted March 31, 2006 Report Share Posted March 31, 2006 i hunt with a man who has got 5 old deben ferret finders that do not work proparly, i would like to no if any 1 knows were i could send them away so that they get fixed? plz help! many thanks! happy hunting! Quote Link to post
macker 5 Posted March 31, 2006 Report Share Posted March 31, 2006 not sure where to send them. some of the lads on might be better. was in the same position as you at the start of the season and ended up with three working. have not got a clue about electronics. but they are not too comlpicated some times when there is no sound at all from them its just one of the two wires attached to the battery. the one that goes towards the speaker can be bad . if the wheel is dodgy try changing it with another one. otherwise just heat up anything that looks like a bad connection with a solder iron.or give it a new solder. also look at the lines on the back of the bored to see if they have any scrapes on them. there might be people who know more than me on here. have fixed seven or eight using three old ones for parts. hope this is some help to you best of luck macker Quote Link to post
Guest chilli Posted March 31, 2006 Report Share Posted March 31, 2006 www.deben.com get the address of there Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.