Guest kevsterjw Posted January 31, 2006 Report Share Posted January 31, 2006 bought a rabbit trap of egay and have figured out the setting after a bit of bending modding and swearing! But there is a "U" shaped piece on top of the trap, it make 3 sides of a square about 5" long on each side, with two legs pointing up in th eair. i'm confused as to what this is for, is it for putting camo on to hide the trap?? like this but with the piece i mentioned on top of it. Quote Link to post
Guest kevsterjw Posted January 31, 2006 Report Share Posted January 31, 2006 no there is a handle aswell but this is the opposite way up, so a horizontal bar running across the top of the trap with two legs sticking up in the air at either end. like [ but pointing up. Quote Link to post
red dog 3 Posted January 31, 2006 Report Share Posted January 31, 2006 hi kevsterjw, if its the folding trap you pull the legs down the side of the trap its a stableiser to stop the trap folding Quote Link to post
Guest kevsterjw Posted January 31, 2006 Report Share Posted January 31, 2006 ahhh yes that makes sense now, taa Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.