dicehorn 38 Posted September 30, 2013 Report Share Posted September 30, 2013 Powder into the case. I used to pour my powder into a funnel whilst the cases were in the loading block (see piccy) but had many occasions where after seating the bullets and putting the block away, I noticed that powder was still in the block having spilt out the sides of the funnel - Ah but which case did it come from!? Not the biggest deal in the world if you are filling a large case and 1/2 grain goes missing, but a major issue accuracy wise if you are filling small cases like 17, 20 or the small 22 calibres My tip therefore is to fill your cases away from the loading block and place the case on a piece of white paper so that any spillage can be noticed right away and action taken to tip the remaining powder in the case back into the trickler and start again. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.