T.F.Student 0 Posted August 25, 2007 Report Share Posted August 25, 2007 Anyone know the size of hole to drill for the stud and any advice as to how far down the forend to drill. Cheers Quote Link to post
T.F.Student 0 Posted August 26, 2007 Author Report Share Posted August 26, 2007 (edited) Perhaps i should say the stud is to fit a Harris Bipod, Series S, Model L. It is also the same stud used to attach a sling to the stock. Edited August 26, 2007 by T.F.Student Quote Link to post
T.F.Student 0 Posted August 27, 2007 Author Report Share Posted August 27, 2007 Just drilled a trial hole in a spare bit of wood...drilled the forend 2 inch back and centered...added my own chrome washer...made some soft washers out of an old motorbike gasket...job jobbed Quote Link to post
Guest king ratcatcher Posted August 27, 2007 Report Share Posted August 27, 2007 Have you got your qd stud yet, if you have then keep going on a spare bit of wood trying diffrent size drill bits till you get a nice fit, then you know what one to use on your stock Quote Link to post
T.F.Student 0 Posted August 27, 2007 Author Report Share Posted August 27, 2007 Cheers I have...and the stud and Bipod are fitted...quite why your not given the details on the hole size when you buy the thing , or a warning not to drill the forend whilst its on the rifle (could get windy no i didn't ) i just don't know Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.