trooperman 73 Posted November 2, 2010 Report Share Posted November 2, 2010 (edited) hi all selling for a shooting friend T8 mod it is about 8 months old had about 280 rounds through it it is unmarked he had it on his .270 but it is the .30 cal version of the moderator it is 1/2 UNF thread and the barrel bush is bored out to about 16.5mm but these are readily available. the lettering on end reads T8 AU 1/2 UNF mate phoned a couple of gun shops this morning and asked how much they buy used T8's for been told about £135.00 so he has ased me to reduce the price so grab a bargain all paperwork is here as well to add because i have been asked my mate sold his .270 without the mod he put in for a variation for a .338 lapua when he got his FAC back the mod was not listed it is no good for the .338 which is why he is selling it hope this helps any other questions. cost his £245.00 for sale for £135.00 + post postal orders,cash,cheque,bank transfer cheers Paul Edited November 3, 2010 by trooperman Link to post Share on other sites
clint 45 Posted November 2, 2010 Report Share Posted November 2, 2010 hello, can this be taken apart to clean ? also is stainless steel baffle? Link to post Share on other sites
trooperman 73 Posted November 2, 2010 Author Report Share Posted November 2, 2010 hi clint no can not be striped but if the directions are followed these never let any one down after every use just spray with WD40 these only rust if not looked after and dont know about the baffle system could be stainless could not dont know and does not say in the instructions forgot to add all paperwork is with it these are popular and well over couple 100 quid. paul Link to post Share on other sites
Recommended Posts