mattw975 0 Posted July 21, 2010 Report Share Posted July 21, 2010 Hi There fellow shooters, I have approx 20 prototype black Delrin silencers that I am trying to clear out (a hobby within a hobby you could say). I am an apprentice served toolmaker & a graduate engineer with my own machine shop. Each have different baffle set ups, lengths (between 130 & 175mm), etc & most are 24mm OD. All are pilot drilled for 10mm which fitted my DIY test rig. I can quite easily modify them to suit different barrel diameters. Slip on types are easier, but can do 1/2" UNF female thread if required. Most are on the tatty side, so I would give them an outer skim on the lathe for aesthetics before posting. I am looking for £25 each incl recorded PP. I would also be up for a swap if you have something of interest to trade (pellets, red dot, a day rough shooting, etc). Just send me a PM if its of interest, Kind Regards, Matt W Link to post Share on other sites
mattw975 0 Posted July 22, 2010 Author Report Share Posted July 22, 2010 PM's replied to thanks Hi There fellow shooters, I have approx 20 prototype black Delrin silencers that I am trying to clear out (a hobby within a hobby you could say). I am an apprentice served toolmaker & a graduate engineer with my own machine shop. Each have different baffle set ups, lengths (between 130 & 175mm), etc & most are 24mm OD. All are pilot drilled for 10mm which fitted my DIY test rig. I can quite easily modify them to suit different barrel diameters. Slip on types are easier, but can do 1/2" UNF female thread if required. Most are on the tatty side, so I would give them an outer skim on the lathe for aesthetics before posting. I am looking for £25 each incl recorded PP. I would also be up for a swap if you have something of interest to trade (pellets, red dot, a day rough shooting, etc). Just send me a PM if its of interest, Kind Regards, Matt W Link to post Share on other sites
Recommended Posts